TideFiAggregatorHook

Robinhood

TideFiAggregatorHook is a Uniswap v4 hook on Robinhood Chain. Runs code on every swap. Can take tokens from swaps. Gates who can add liquidity. Runs at pool creation.

Contract name: TideFiAggregatorHook

0x73036032c3e81b1262c8bfbb29fc1383a76de888 First pool 11 Nov 2026View on explorer

Launch a pool with this hook

CBe carefulNot in Uniswap’s hook registry · Can take tokens out of swaps?

Pools

Last new pool

Code size

6,094 B

How this hook works

Trading tax

A trading tax hook. It takes a cut of every trade, stops liquidity being added directly and only lets approved callers create pools.

Takes a cut of every trade

On top of the normal pool fee, it keeps a share of each trade.

The code that does this (beforeSwap):

function beforeSwap(address sender, PoolKey calldata key, IPoolManager.SwapParams calldata params, bytes calldata)
    external
    onlyPoolManager
    returns (bytes4, BeforeSwapDelta, uint24)
{
    if (params.amountSpecified >= 0) revert TideFiAggregatorHookExactOutputNotSupported();
    // forge-lint: disable-next-item(unsafe-typecast)
    uint256 amountIn = uint256(-params.amountSpecified);
    (Currency currencyIn, Currency currencyOut) =
        params.zeroForOne ? (key.currency0, key.currency1) : (key.currency1, key.currency0);

    poolManager.take(currencyIn, address(this), amountIn);
    poolManager.sync(currencyOut);
    (uint256 amountFilled,) = tidefi.swap(
        Currency.unwrap(currencyIn),
        Currency.unwrap(currencyOut),
        amountIn,
        0,
        type(uint256).max,
        address(poolManager)
    );
    if (amountFilled != amountIn) revert TideFiAggregatorHookPartialFill(amountIn, amountFilled);
    // The output is what actually landed in the PoolManager, not TideFi's return value.
    uint256 amountOut = poolManager.settle();

    PoolId poolId = key.toId();
    (uint24 protocolFee, uint256 protocolFeeAmount) =
        _takeProtocolFee(poolId, params.zeroForOne, currencyOut, amountOut);
    int128 specifiedDelta = amountIn.toInt128();
    int128 unspecifiedDelta = -(amountOut - protocolFeeAmount).toInt128();
    // …

Liquidity can’t be added directly
Nobody can add liquidity to its pools through Uniswap directly. Liquidity only comes in through the hook’s own code.

Only approved callers create pools

New pools with this hook can only be created by approved callers, for example its own factory or launcher.

The code that does this (beforeInitialize):

function beforeInitialize(address sender, PoolKey calldata key, uint160) external onlyPoolManager returns (bytes4) {
    if (sender != tidefi.owner()) revert TideFiAggregatorHookOnlyTideFiOwner();
    // Currencies are sorted, so native ETH can only be currency0.
    if (Currency.unwrap(key.currency0) == address(0)) revert TideFiAggregatorHookNativeCurrencyNotSupported();
    if (key.fee != POOL_FEE || key.tickSpacing != POOL_TICK_SPACING) {
        revert TideFiAggregatorHookPoolKeyNotCanonical();
    }
    IERC20(Currency.unwrap(key.currency0)).forceApprove(address(tidefi), type(uint256).max);
    IERC20(Currency.unwrap(key.currency1)).forceApprove(address(tidefi), type(uint256).max);

    PoolId poolId = key.toId();
    _initializedPools.push(key);
    _poolIndexPlusOne[poolId] = _initializedPools.length;
    emit AggregatorPoolRegistered(poolId);
    return IHooks.beforeInitialize.selector;
}

Simple trades only

Trades must state the amount going in, not the amount coming out.

The code that does this (beforeSwap):

function beforeSwap(address sender, PoolKey calldata key, IPoolManager.SwapParams calldata params, bytes calldata)
    external
    onlyPoolManager
    returns (bytes4, BeforeSwapDelta, uint24)
{
    if (params.amountSpecified >= 0) revert TideFiAggregatorHookExactOutputNotSupported();
    // forge-lint: disable-next-item(unsafe-typecast)
    uint256 amountIn = uint256(-params.amountSpecified);
    (Currency currencyIn, Currency currencyOut) =
        params.zeroForOne ? (key.currency0, key.currency1) : (key.currency1, key.currency0);

    poolManager.take(currencyIn, address(this), amountIn);
    poolManager.sync(currencyOut);
    (uint256 amountFilled,) = tidefi.swap(
        Currency.unwrap(currencyIn),
        Currency.unwrap(currencyOut),
        amountIn,
        0,
        type(uint256).max,
        address(poolManager)
    );
    if (amountFilled != amountIn) revert TideFiAggregatorHookPartialFill(amountIn, amountFilled);
    // The output is what actually landed in the PoolManager, not TideFi's return value.
    uint256 amountOut = poolManager.settle();

    PoolId poolId = key.toId();
    (uint24 protocolFee, uint256 protocolFeeAmount) =
        _takeProtocolFee(poolId, params.zeroForOne, currencyOut, amountOut);
    int128 specifiedDelta = amountIn.toInt128();
    int128 unspecifiedDelta = -(amountOut - protocolFeeAmount).toInt128();
    // …

Who controls it: Nobody. The hook has no admin functions, and the code cannot be changed.

Based on the hook’s published code.

Safety report

Before you build on it. Automated checks, not an audit

5 to review3 passed1 info1 unknown

Contract

✓Code is fixedNo proxy, so the code that runs today is the code that runs tomorrow.

✓No admin key foundIt has no owner wallet, so the hook developer has no single key to change its rules (as far as the standard check goes).

✓Source code publishedThe code on the block explorer matches what's deployed (contract: TideFiAggregatorHook).

Pools3 to review

!Pools don’t trade in Uniswap’s app yetIt runs code on swaps, so Uniswap’s app only routes it once Uniswap Labs approves it, and it isn’t approved yet. Adding liquidity still works, and other apps can trade it.

!Can reject swapsIt runs on every trade and can block it. Used for things like launch limits and start times.

!Can change swap amountsIt has return-delta permissions, so it can take or add tokens in every trade (taxes, fees, burns, custom curves). Check where that value goes and who controls it.

iControls who can add liquiditybeforeAddLiquidity checks every deposit, so outside LPs may be blocked.

Track record2 to review

!Not in Uniswap’s hook registryNot listed by Uniswap Labs, so nobody outside the hook developer has looked at it. Most abandoned and malicious hooks are unlisted.

!Brand newIts first pool was created less than a day ago, so it has no track record. Prefer proven hooks for a real launch.

?No audit linkedNothing in the registry. Ask the hook developer for one or review the source yourself.

What it can do

Runs code on every swap

Its code executes inside each trade in pools that use it.

Can take tokens from swaps

It can take or add tokens during a swap. Fees, burns and custom curves work this way, and so do scams.

Gates who can add liquidity

It checks every deposit before it goes in.

Runs at pool creation

It runs when a pool is created, often to lock in that pool’s settings.

Hook history

Across all its pools, the hook handled a trade: $100.41.

Handled a trade 1 time, worth $100.41
Latest transactions
- 0xe5c44853…394c07 block 111,824,044
See every one on the explorer ↗
Registered an aggregator pool 14 times
Latest transactions
- 0x770cb11b…19609e block 111,819,979
- 0x3f0e16a2…1a05d6 block 111,819,974
- 0x372a946c…4ca878 block 111,819,969
- 0xfd6b487f…f6fd65 block 111,819,964
- 0xdb5bd6f6…24dc09 block 111,819,959
- 0x2f7a142f…1decc9 block 111,819,954
- 0x572865c1…5bb44b block 111,819,948
- 0x3fda4826…eb320e block 111,819,943
- 0xaab53dcb…b37ae4 block 111,819,938
- 0xc1a59012…5ad194 block 111,819,933
See every one on the explorer ↗

Counted from what the hook recorded on-chain across all its pools, for every action in its published code, plus token transfers in and out of it. Dollar values count the amounts paid in ETH, stablecoins, BNB and BTC, at today’s prices.

Pools

14 total

PairCreatedTrades · 7dPool ID

USDG / META 1h 1 trades · 7d 0x0c29…1a42 Tx ↗